บทความวิจัยหรือบทความวิชาการ

ภาควิชาเคมี

ประจำปี ทั้งหมด


กราฟสรุปข้อมูลตีพิมพ์

กราฟแยกตามกลุ่ม



ระดับชาติ 6qwCQR.png
ลำดับ ชื่อบทความ ชื่อบทความภาษาอังกฤษ บทคัดย่อ ผู้ตีพิมพ์ กลุ่ม/รูปแบบการนำเสนอ ระดับ รายละเอียด
1 Synthesis and cytotoxic activity of azanaphoquinone annelated pyrrole derivatives Synthesis and Cytotoxic Activity of Azanaphthoquinone Annelated Pyrrole Derivatives

Azanaphthoquinone annelated pyrroles have been developed from the natural anticancer drug, mitoxantrone to reduce cardiotoxic side-effects. This paper reports the synthesis of azanaphthoquinone annelated pyrrole derivatives as cytostatic compounds. The synthetic pathway was started from the commercially-available 5-hydroxyisoquinoline via a three step reaction to obtain 1H-pyrrolo[3,2-g]isoquinoline-4,9-dione. N-Alkylation of nitrogen atom in pyrrole ring was carried out under basic conditions with different side chains to obtain mono-substituted azanaphthoquinone annelated pyrroles (2a-e) with 2 to 3-carbon side chains in moderate to good yields. The hydrazone and thiosemicarbazone derivatives were synthesized by a condensation reaction of mono-substituted products 2 with hydrazine and thiosemicarbazide respectively. The reactions occurred regio-selectively at C-4 to give hydrazones (3a-e) and thiosemicarbazones (4a-e) respectively. The synthesized compounds were purified by column chromatography and characterized by spectroscopic techniques, including 1H NMR, 13C NMR, IR, UV and LC-MS. The antiproliferative activity of the synthesized compounds was evaluated on cervical carcinoma: KB/HeLa by using xCELLigence from Roche. The results showed that the mono-substituted products with 2-carbon side chain (2b) exhibited the highest activity with IC50 value of 0.008 M. The mono-substituted product 2 showed higher inhibition in comparison to hydrazone and thiosemicarbazone derivatives. These results lead to the optimization of the target molecules in further works. 

นิภาวรรณ พองพรหม TCI กลุ่ม 2 ชาติ
    วันที่ตีพิมพ์
  • 2017-09-01
    ชื่อวารสาร
  • วารสารวิทยาศาสตร์และเทคโนโลยี มหาวิทยาลัยอุบลราชธานี
    DOI
2 ชุดการทดลองเคมีแบบย่อส่วนต้นทุนต่ำเพื่อสนับสนุนความเข้าใจมโนมติ เรื่อง สมดุลเคมี สำหรับนักเรียนระดับมัธยมศึกษาปีที่ 5 0

The main purpose of this research was to develop low-cost small-scale chemistry experimental kit on chemical equilibrium, and then investigate students’ conceptual understanding from learning with the developed kit. The samples were 37 of 11-grade students studying in a large-size high school in Ubon Ratchathani. The data collecting tools included a two-tier diagnostic test and a survey of students’ attitudes and experiences towards chemistry subject. The implementation of the small-scale experimental kit through 5E-inquiry cycle resulted that students’ averaged percentages for each of the pretest, posttest and retentiontest were 20.48,60.64and59.60, respectively, in which the normalized gain was in the medium level. The dependent samples t-test analysis indicated that their posttest scores were statistically higher than those of pretest scores, but not statistically different from the retention-test scores at the 95% significance level. After the intervention, the total percentage of students in the partial and sound conceptual understanding (PU+SU) categories was increased by 51.48, while the total percentage of students in the mis- and no-conceptual understanding (MU+NU) decreased by51.89. In addition, theirpost-attitudes and experiences towards chemistry subject were statistically higher than those before learning using the kit. This verified that the intervention of low-cost small-scale chemistry experimental kit was the effective tool for promoting students to change to the more correct conceptual understanding and to the more positive attitudes and experiences towards chemistry.

ศักดิ์ศรี สุภาษร TCI กลุ่ม 1 ชาติ
    วันที่ตีพิมพ์
  • 2017-07-01
    ชื่อวารสาร
  • วารสารหน่วยวิจัยวิทยาศาสตร์ เทคโนโลยี และสิ่งแวดล้อมเพื่อการเรียนรู้
    DOI
3 การสร้างเซลล์กัลวานิกอย่างง่ายที่ทําจากเส้นด้ายเพื่อศึกษาไฟฟ้าเคมี Fabricationof Simple Galvanic Cells Using Cotton Thread to Investigate Electrochemistry

The main purpose of this research article was to fabricate simple galvanic cellsusing cotton thread. This device contains various metal strips (Cu, Ag, Zn, Pb, Sn, Fe, Al and Mg), metal solutions, and potassium nitrate solution serving as electrodes, metal ions, and electrolyte, respectively. In this article, cotton thread is not only used to be a support for reactions between each half-cell, but also a salt bridge for electrolyte. The results showed that the observed cell potentials, Ecell (Obsd) were slightly different from the theoretical cell potentials, Ecell (Theor), calculated from the Nernst equation. This device also can be used to investigate the effect of concentrations on the electromotive force (emf). This device can be applied as a teaching tool of electrochemistry for students at the secondary school level because of an easy way to fabricate galvanic cells.

เสนอ ชัยรัมย์ TCI กลุ่ม 1 ชาติ
    วันที่ตีพิมพ์
  • 2017-07-01
    ชื่อวารสาร
  • วารสารหน่วยวิจัยวิทยาศาสตร์ เทคโนโลยี และสิ่งแวดล้อมเพื่อการเรียนรู้
    DOI
4 การใช้กระติกน้ำสุญญากาศเป็นแคลอริมิเตอร์อย่างง่าย เพื่อหามวลโมเลกุลของสารประกอบจากสมบัติคอลลิเกตีฟ Using vacuum flask as a simple calorimeter for determination of molecular weight of compounds from colligative properties

This research aimed to develop an experimental demonstration in the laboratory to determine the molecular weight of compound from freezing point depression by using a vacuum flask as a simple calorimeter. Colligative properties depend on the number, not the identity of molecule be measuring. All the substances used in this study were environmental-friendly: water was used as a solvent, while allsolutes were rock salt, monosodium glutamate and sugar. In experiment, the solvent or solution was placed in a vial with a thermometer, put into a vacuum flask containing sprinkle rock salt on the ice, and then record the decreasing temperature every minute. The relationship between the temperature and time was plotted to determine the freezing point of the solvent (T) or solution (Tf ). Furthermore, this approach was applied to determine the molecular weight of compound  in red or yellow food color. The calculated molecular weight of all solutes was closed to the actual value. The percentage error of rock salt, monosodium glutamate, sugar, red food colour and yellow food colour was 0.53%, 1.12%, 1.86%, 0.31%, and 0.11% respectively. This experimental demonstration ought to be interesting to science teachers for the instruction of colligative properties at all levels in laboratory.             

เสนอ ชัยรัมย์ TCI กลุ่ม 2 ชาติ
    วันที่ตีพิมพ์
  • 2017-05-01
    ชื่อวารสาร
  • วารสารวิทยาศาสตร์และเทคโนโลยี มหาวิทยาลัยอุบลราชธานี
    DOI
5 Development of corn waste for reuse as a catalyst สายสมร ลำลอง TCI กลุ่ม 1 ชาติ
    วันที่ตีพิมพ์
  • 2018-12-07
    ชื่อวารสาร
  • Global Society For Research And Development international conference
    DOI
6 ผลการจัดการเรียนรู้สะเต็มศึกษาของนักเรียนชั้นมัธยมศึกษาปีที่ 6 เรื่องไฟฟ้าเคมี กานต์ตะรัตน์ วุฒิเสลา TCI กลุ่ม 1 ชาติ
    วันที่ตีพิมพ์
  • 2018-12-06
    ชื่อวารสาร
  • การประชุมวิชาการระดับชาติ ครั้งที่ 15 มหาวิทยาลัยเกษตรศาสตร์วิทยาเขต กำแพงแสน
    DOI
7 Ready-to-Use Titanium Dioxide Slurry for Cosmetics Application Ready-to-Use Titanium Dioxide Slurry for Cosmetics Application

The objective of research was to prepare ready-to-use TiO2 in slurry form for easy use in cosmetics. Three types of TiO2 source were prepared as TiO2 slurry, namely commercial TiO2 (TiO2 -A and TiO2 -P25) and synthesized TiO2 (TiO2 -S) The suitable of solvents and amount of TiO2 , including optimum sonication time were studied. The experiments were set up as two groups of solvent, i.e. (1) six types of pure solvent and (2) nine types of mixed solvent. In order to achieve the best result of using solvent, 0.0075 g TiO2 powder was added to each of 15 mL solvent and sonicated for 10 minutes. The results showed that butylene glycol (BG) was the best of pure solvent, and mixture of propylene glycol (PG) and BG ratio 1:1 was the best of mixed solvent. Due to lower cost of PG than BG, PG mixed with BG was chose as the solvent for slurry preparation. The amount of TiO2was varied from 10-60% w/v of BG. Best slurry texture obtained using 60 %w/v of TiO2 . The study of sonication time was varied from 10-60 minutes. It was found that the optimum time was at 30 minutes. Texture and stability of prepared slurry were similar to commercial. Different sunscreen were formulated by containing prepared and commercial slurry separately and evaluated. There were no significant difference results between prepared slurry and commercial. In order to investigate the satisfaction of products, 40 volunteers were asked to use products for one week and answer in the questionnaires. The product containing prepared slurry was satisfied by 96% of volunteers, whereas the product containing commercial slurry was satisfied by 76% of volunteers. 

นุชนาพร พิจารณ์ TCI กลุ่ม 1 ชาติ
    วันที่ตีพิมพ์
  • 2019-01-01
    ชื่อวารสาร
  • The Journal of Industrial Technology Suan Sunandha Rajabhat University
    DOI
8 ไบโอซาร์ (วัสดุมหัศจรรย์) : การสังเคราะห์ พิสูจน์เอกลักษณ์ และศักยภาพการประยุกต์ใช้งาน Biochar (Magical Material) : Synthesis, Characterization and Potential Applications

ไบโอชาร์ที่ผลิตจากสารชีวมวลเป็นไบโอชาร์ที่อุดมไปด้วยคาร์บอน การผลิตไบโอชาร์จากสารชีวมวลอาศัยกระบวนการไพโรไลซิสซึ่งเป็นกระบวนการเผาไหม้ด้วยความร้อนโดยไม่ใช้ออกซิเจนหรือในสภาวะจํากัดออกซิเจนไบโอชาร์มักถูกใช้เพื่อลดปัญหาสิ่งแวดล้อมด้านต่าง ๆ เช่น ช่วยลดปริมาณแก๊สคาร์บอนไดออกไซด์ในชั้นบรรยากาศได้โดยกักเก็บคาร์บอนในดิน และใช้เพื่อปรับปรุงดินสําหรับทําการเกษตรเนื่องจากถ่านคาร์บอนมีพื้นที่ผิวสูงและมีปริมาณรูพรุนสูง จึงสามารถช่วยกักเก็บน้ําและธาตุอาหารในดินให้กับพืชได้เป็นอย่างดี นอกจากนี้ไบโอชาร์ยังสามารถแก้ปัญหามลภาวะทางน้ําได้ด้วย โดยการดูดซับสารหรือโลหะหนักเอาไว้ในโครงสร้างและรูพรุนของไบโอชาร์ เนื่องจากไบโอชาร์มีประโยชน์ใช้งานที่หลากหลายและมีต้นทุนในการผลิตต่ํา จึงทําให้ไบโอชาร์เป็นวัสดุที่น่าสนใจในการนําไปศึกษาวิจัยต่อยอดเพื่อพัฒนาเป็นผลิตภัณฑ์ที่สามารถนําไปประยุกต์ใช้ในด้านอื่น ๆ ได้อีกมากมาย บทความนี้นําเสนอวิธีการเตรียม การพิสูจน์เอกลักษณ์ และการประยุกต์ใช้ไบโอชาร์ทั้งในปัจจุบันและในอนาคต

สายันต์ แสงสุวรรณ TCI กลุ่ม 1 ชาติ
    วันที่ตีพิมพ์
  • 2023-01-01
    ชื่อวารสาร
  • วารสารวิทยาศาสตร์และเทคโนโลยี มหาวิทยาลัยอุบลราชธานี
    DOI
9 การสังเคราะห์และปรับปรุงคุณสมบัติของโคบอลต์ซิงค์อะลูมิเนียมเลเยอร์ดับเบิลไฮดรอกไซด์ด้วยอนุภาคแม่เหล็กระดับนาโนและไคโตซานสำหรับการดูดซับสีย้อมบริลเลียน กรีน Synthesis and Modification of CoZnAl Layered Double Hydroxides with Magnetic Nanoparticle and Chitosan for Brilliant Green Dye Adsorption

Cobalt-zinc-aluminum layered double hydroxides (CoZnAl-LDHs) have been prepared and successfully modified with magnetic nanoparticles and chitosan (Fe3O4CS@CoZnAl-LDHs) for being used as Brilliant Green (BG) dye adsorbent to solve the dye contamination in water problem. Magnetic nanoparticles (Fe3O4) allow easy separation of the adsorbent from the solution, and chitosan (CS) will increase the hydroxyl group density for the interaction with the positively charged BG dye. The materials were characterized by XRD and it revealed that the modified materials exhibited the structural characteristics of LDHs. From dye adsorption studies at pH 7 and 25 ?C with initial dye concentration of 20 ppm, Fe3O4CS@CoZnAl-LDHs exhibited 99% dye removal, which was greater than that of CoZnAl-LDHs (58%). The adsorption process reached equilibrium within 360 min. In addition, the adsorption isotherm followed the Langmuir model, and from the kinetic studies, this adsorption process corresponded to a pseudo second-order reaction. The synthesized material is promising for being used as an adsorbent to remove the dye from polluted water.

สุภาพ ตาเมือง TCI กลุ่ม 2 ชาติ
    วันที่ตีพิมพ์
  • 2023-07-01
    ชื่อวารสาร
  • วารสารวารสารวิทยาศาสตร์และวิทยาศาสตร์ศึกษา
10 การศึกษาสมรรถนะการแก้ปัญหาแบบร่วมมือของนักเรียนชั้นมัธยมศึกษาปีที่ 4 เรื่อง สารละลาย โดยใช้การจัดการเรียนรู้สืบเสาะร่วมกับชุดการทดลองสะตีมศึกษา The Study of the Collaborative Problem-Solving Competency of Grade-10 Students on Solution using Inquiry-based learning with a set of STEAM Education Experiments

งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาสมรรถนะการแก้ปัญหาแบบร่วมมือ เรื่อง สารละลาย ของนักเรียนชั้นมัธยมศึกษาปีที่ 4 ด้วยการจัดการเรียนรู้สืบเสาะร่วมกับชุดการทดลองสะตีมศึกษา แบบแผนการวิจัยเป็นแบบกลุ่มตัวอย่างเดียวและประเมินระหว่างเรียนครั้งเดียว กลุ่มตัวอย่างจำนวน 40 คนได้จากการเลือกแบบเจาะจง เครื่องมือที่ใช้ในการวิจัยคือ แผนการจัดการเรียนรู้สืบเสาะร่วมกับชุดการทดลองสะตีมศึกษา จำนวน 5 แผน และแบบประเมินสมรรถนะการแก้ปัญหาแบบร่วมมือ แผนการจัดการเรียนรู้สืบเสาะ นักเรียนทดลองเตรียมสารละลาย 2 M CuSO4 จาก CuSO4.5H2O  นักเรียนทดลองเจือจางสารละลาย 2 M เป็น 1 M CuSO4 นักเรียนผสมสารละลาย 1 M และ 2 M CuSO4 ได้ความเข้มข้นของสารละลายผสม 1.5 M CuSO4 แผนการจัดการเรียนรู้สะตีมศึกษาจะอยู่ภายใต้หัวข้อเรื่อง สารละลาย ได้แก่ สบู่เหลวกลิ่นธรรมชาติ สบู่ก้อนหอมสดชื่น น้ำยาล้างจานสมุนไพร ยาหม่องน้ำ และสเลอปี้หรรษา โดยใช้เวลาในการจัดการเรียนรู้ 10 ชั่วโมง จากการวิเคราะห์สมรรถนะการแก้ปัญหาแบบร่วมมือจากใบงานสะตีมศึกษาด้วยการวิเคราะห์เนื้อหาเพื่อตีความคำตอบของนักเรียนและสรุปข้อมูลและและจัดระดับสมรรถนะของนักเรียนตามกรอบการประเมินสมรรถนะการแก้ปัญหาแบบร่วมมือของ PISA พบว่าสมรรถนะการแก้ปัญหาแบบร่วมมือเฉลี่ยทุกด้านมีคะแนนอยู่ที่ 2.73 คะแนน คิดเป็นร้อยละ 91 ซึ่งอยู่ในระดับสมรรถนะสูง

กานต์ตะรัตน์ วุฒิเสลา TCI กลุ่ม 2 ชาติ
    วันที่ตีพิมพ์
  • 2024-01-01
    ชื่อวารสาร
  • วารสารวิทยาศาสตร์และวิทยาศาสตร์ศึกษา
11 ไฮโดรเจลพอลิเมอร์ผสม(2-อะคริลามิโด-2-เมทิลโพรเพนซัลโฟนิค เอซิด-อะคลิลิค เอซิด) รองรับอนุภาคคอปเปอร์ระดับนาโนและการใช้ประโยชน์เป็นตัวเร่งปฏิกิริยาสำหรับการผลิตแก๊สไฮโดรเจนจากปฏิกิริยาการย่อยสลายน้ำด้วยโซเดียมโบโรไฮไดรด์ Hydrogel poly(2-acrylmido-2-methylpropanesulfonic acid-co-acrylic acid) supported copper nanoparticles and their use as catalyst for hydrogen production from hydrolysis of sodium borohydride

ในงานวิจัยนี้ ไฮโดรเจลพอลิเมอร์ผสมที่มาจาก 2-อะคริลามิโด-2-เมทิลโพรเพนซัลโฟนิค เอซิด กับ อะคลิลิค เอซิด ด้วยอัตราส่วนต่าง ๆ สามารถสังเคราะห์ขึ้นได้โดยอาศัยปฏิกิริยาฟรีแรดิคอลพอลิเมอไรเซชันเพื่อใช้ในการดูดซับไอออนคอปเปอร์ด้วยหมู่ฟังก์ชันที่มีอยู่ภายในโครงร่างข่ายไฮโดรเจล หลังจากนั้น ไอออนคอปเปอร์ที่ถูกตรึงภายในโครงสร้างไฮโดรเจลถูกเปลี่ยนให้เป็นอนุภาคคอปเปอร์ระดับนาโนโดยอาศัยปฏิกิริยารีดักชันจากการใช้โซเดียมโบโรไฮไดรด์ทำหน้าที่เป็นตัวรีดิวซ์  ศึกษาการบวมตัวของไฮโดรเจล ตลอดจนวิเคราะห์อนุภาคคอปเปอร์ระดับนาโนในไฮโดรเจลพอลิเมอร์โดยอาศัยเทคนิคฟูเรียร์ทรานส์ฟอร์มอินฟราเรดสเปกโตรสโคปีและการเปลี่ยนแปลงน้ำหนักของสารโดยอาศัยคุณสมบัติทางความร้อน หลังจากนั้น ศึกษาประสิทธิภาพในการเร่งปฏิกิริยาของไฮโดรเจลพอลิเมอร์ผสมที่รองรับอนุภาคคอปเปอร์ระดับนาโนในการย่อยสลายน้ำด้วยโซเดียมโบโรไฮไดรด์สำหรับการผลิตแก๊สไฮโดรเจน คำนวณพารามิเตอร์จำเพาะของปฏิกิริยาจากสมการอาร์รีเนียสและสมการอายริงก์ ผลการคำนวณที่ได้พบว่า พลังงานก่อกัมมันต์ (Ea) มีค่า 18.20 kJ mol-1 ในขณะที่เอนทาลปีพลังงานกระตุ้นและเอนโทรปีพลังงานกระตุ้นมีค่า 20.84 kJ mol-1 และ -197.54 kJ mol-1 K-1 ตามลำดับ นอกจากนี้ ไฮโดรเจลพอลิเมอร์ผสมที่รองรับอนุภาคคอปเปอร์ระดับนาโนยังสามารถนำกลับมาใช้ใหม่ได้หลายครั้งโดยยังคงประสิทธิภาพในการเร่งปฏิกิริยา งานวิจัยนี้แสดงให้เห็นว่า ไฮโดรเจลพอลิเมอร์ผสมที่รองรับอนุภาคคอปเปอร์ระดับนาโนมีประโยชน์อย่างมากในการย่อยสลายน้ำด้วยโซเดียมโบโรไฮไดรด์สำหรับการผลิตแก๊สไฮโดรเจน รวมทั้งในการเร่งปฏิกิริยาอื่น ๆ ที่น่าสนใจ

เสนอ ชัยรัมย์ TCI กลุ่ม 2 ชาติ
    วันที่ตีพิมพ์
  • 2024-01-01
    ชื่อวารสาร
  • วารสารวิทยาศาสตร์และวิทยาศาสตร์ศึกษา (JSSE)


ระดับนานาชาติ 6qwCQR.png
ลำดับ ชื่อบทความ ชื่อบทความภาษาอังกฤษ บทคัดย่อ ผู้ตีพิมพ์ กลุ่ม/รูปแบบการนำเสนอ ระดับ รายละเอียด
1 A DFT study of volatile organic compounds adsorption on transition metal deposited graphene A DFT study of volatile organic compounds adsorption on transition metal deposited graphene

Recently, elevated global emission of volatile organic compounds (VOCs) was associated to the acceleration and increasing severity of climate change worldwide. In this work, we investigated the performance of VOCs removal via modified carbon-based adsorbent using density functional theory. Here, four transition metals (TMs) including Pd, Pt, Ag, and Au were deposited onto single-vacancy defective graphene (SDG) surface to increase the adsorption efficiency. Five prototypical VOCs including benzene, furan, pyrrole, pyridine, and thiophene were used to study the adsorption capability of metal-deposited graphene adsorbent. Calculation results revealed that Pd, Pt, Au, and Ag atoms and nanoclusters bind strongly onto
the SDG surface. In this study, benzene, furan and pyrrole bind in the
-interaction mode using delocalized -electron in aromatic ring, while pyridine and thiophene favor X- interaction mode, donating
lone pair electron from heteroatom. In terms of adsorption, pyridine VOC adsorption strengths to the TM-cluster doped SDG surfaces are Pt
4 (-2.11 eV) > Pd4 (-2.05 eV) > Ag4 (-1.53 eV) > Au4 (-1.87 eV). Our findings indicate that TM-doped SDG is a suitable adsorbent material for VOC removal. In addition, partial density of states analysis suggests that benzene, furan, and pyrrole interactions with TM cluster are based on p-orbitals of carbon atoms, while pyridine and thiophene interactions are facilitated by hybridized sp2-orbitals of heteroatoms. This work provides a key insight into the fundamentals of VOCs adsorption on carbon-based adsorbent.

ศิริพร จึงสุทธิวงษ์ Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2016-02-28
    ชื่อวารสาร
  • Applied Surface Science
    DOI
2 Preparation and characterization of modified telechelic natural rubber-based pressure-sensitive adhesive ศิริวัฒน์ ระดาบุตร Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2017-12-31
    ชื่อวารสาร
  • JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
    DOI
3 Photoresponsive Nano-Coumarin with Indole Auxin Hormone รักเกียรติ จิตคติ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2017-11-30
    ชื่อวารสาร
  • Defect and Diffusion Forum
    DOI
4 Non-Enzymatic Glucose Sensors for Sensitive Amperometric Detection Based on Simple Method of Nickel Nanoparticles Decorated on Magnetite Carbon Nanotubes Modified Glassy Carbon Electrode มะลิวรรณ อมตธงไชย Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2017-11-30
    ชื่อวารสาร
  • International Journal of Electrochemical Science
    DOI
5 Synthesis and properties biodegradable hydrogels based on cross-linked natural rubber and cassava starch ชัยวุฒิ วัดจัง Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2017-11-01
    ชื่อวารสาร
  • Journal of Elastomers and Plastics
    DOI
6 Push-Pull N-Annulated Perylene-Based Sensitizers for Dye-Sensitized Solar Cells: Theoretical Property Tuning by DFT/TDDFT Push-Pull N-Annulated Perylene-Based Sensitizers for Dye-Sensitized Solar Cells: Theoretical Property Tuning by DFT/TDDFT

We evaluate the effects of donor and p-linker moieties on power-conversion efficiency for a series of push-pull type, Nannulated perylene dyes for dye-sensitized solar cells. Triphenylamine and diphenylamine are used as electron donors. We investigate the structural, optical, and electronic properties of dyes by performing density functional theory (DFT) calculations at the B3LYP level, using the 6-311G(d,p) basis set. Electronic absorption wavelengths were investigated using time dependent DFT (TD-DFT) calculations on M062x/6-311G(d,p) in THF. Our calculated results reveal that the diphenylamine (DPA) donor provides a small dihedral angle between diphenylamine and the perylene core, resulting in a red-shifted absorption spectrum. Introduction of an O-methoxy substituent into diphenylamine improves its donor properties, red-shifts the absorption wavelength, and increases the dipole moment, indicating increased intramolecular charge transfer in the Omethoxy substituted dye. Incorporation of a C-C triple bond in linker extends the p-conjugation system and decreases the dihedral angle between N-annulated perylene and cyanoacrylic acid; the dye adopts a planar structure, causing a red-shift in the absorption spectrum. Our results demonstrate that use of computational design can to help the experimentalist for out looking future developments to identify push-pull perylene sensitizers for highly efficient solar cells.

ศิริพร จึงสุทธิวงษ์ Q2 นานาชาติ
    วันที่ตีพิมพ์
  • 2017-10-25
    ชื่อวารสาร
  • CHEMISTRYSELECT
    DOI
7 Gold nanoparticles stabilized by starch polymer and their use as catalyst in homocoupling of phenylboronic acid Gold nanoparticles stabilized by starch polymer and their use as catalyst in homocoupling of phenylboronic acid

In this study, gold nanoparticles (Au NPs) stabilized by a starch polymer have been successfully prepared and characterized via a number of techniques including X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and dynamic light scattering (DLS) measurements. The catalytic activity of starch-stabilized Au NPs was also examined toward the homocoupling of phenylboronic acid in water using oxygen in air as oxidant at an ambient temperature (25 ± 1 °C). Several parameters including the catalyst loading, base equivalent (eq.), base type, and reaction time were studied. This study offers a simple, inexpensive and environmentally friendly procedure for the stabilization of colloidal gold catalysts using a hydroxyl-rich structure of starch polymer with a great promise through potential applications in related fields.

เสนอ ชัยรัมย์ Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2017-10-01
    ชื่อวารสาร
  • 0
8 Starch-supported gold nanoparticles and their use in 4-nitrophenol reduction Starch-supported gold nanoparticles and their use in 4-nitrophenol reduction

Gold nanoparticles (AuNPs) have been synthesized through a green synthesis method using mung bean starch (MBS) as both reducing and stabilizing agents. The chemical state was analyzed by X-ray photoelectron spectroscopy (XPS). The crystalline structures were characterized by X-ray diffraction (XRD). The thermal properties were measured by thermogravimetric analysis and differential thermal analysis (TGA/DTA). The surface morphology was investigated by scanning electron microscopy (SEM). In order to investigate the catalytic activity, the mung bean starch-supported AuNPs (MBS-AuNPs) was utilized as a heterogeneous catalyst in the reduction of 4-nitrophenol (4-NP) in the presence of sodium borohydride (NaBH4). The kinetic studies under the different experimental conditions were performed in order to determine the activation parameters from the Arrhenius and Eyring equations. It was found that the activation energy (Ea), activation enthalpy (DH# ) and activation entropy (DS# ) were calculated to be 47.42 kJ mol1 , 44.78 kJ mol1 and 261.49 kJ mol1 , respectively. In addition, the catalytic activity was 73% reduction after recycling at the end of the fifth use. This work offers a non-toxic procedure for the synthesis of nanoparticles using starch-rich polymers with a great promise toward other potential applications.

เสนอ ชัยรัมย์ Q2 นานาชาติ
    วันที่ตีพิมพ์
  • 2017-09-30
    ชื่อวารสาร
  • Journal of Saudi Chemical Society
    DOI
9 Influence of Pyrolytic Carbon Black Prepared from Waste Tires on Mechanical Properties of Natural Rubber Vulcanizates Influence of Pyrolytic Carbon Black Prepared from Waste Tires on Mechanical Properties of Natural Rubber Vulcanizates

This research aimed to investigate the possibility of pyrolytic carbon black (PCB) used as filler in natural rubber (NR) and its effect on Mooney viscosity, cure characteristics and mechanical properties compared with commercial carbon black (N774). The results revealed that Mooney viscosity, stiffness and heat build-up tended to increase with increasing both PCB and N774 loading, whereas elongation at break decreased. However, the maximum tensile and tear strengths appeared at the optimum filler loading for both PCB and N774. At similar filler content, PCB-filled NR compounds have higher cure time, heat build-up and thermal resistance. Nevertheless, they exhibited lower Mooney viscosity and mechanical properties compared to N774-filled NR. Finally, it can be concluded that PCB could be utilized as filler in NR compound to act as semi-reinforcing filler and was classified as a filler to reduce costs.

สราวุธ ประเสริฐศรี Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2017-08-23
    ชื่อวารสาร
  • Key Engineering Materials
10 Significant enhancement in the performance of porphyrin for dye-sensitized solar cells: aggregation control using chenodeoxycholic acid

In this work, a series of porphyrin-based sensitizers, coded as ZnTEP, ZnTTEP, and ZnTTTD in which different kinds of thienyl groups are used as the p-linker, have been designed and successfully synthesized. Their synthesis, photophysical and electrochemical properties, and theoretical DFT calculations, as well as their applications in dye-sensitized solar cells (DSSCs) are reported. The results showed that the power conversion efficiency (Z) increases in the order of 1.14, 2.15 and 3.51% for ZnTEP, ZnTTEP and ZnTTTD, respectively. A significant improvement in the Z value was achieved with ZnTTTD-based solar cells, which was approximately three times the magnitude when compared to the lowest ZnTEP-based solar cells. Moreover, the effects of chenodeoxycholic acid (CDCA) in a dye solution as a co-adsorbent on the photovoltaic performance of DSSCs were investigated. It was found that the coadsorption of CDCA can hinder the formation of dye aggregates and the improve electron injection yield and thus Jsc. The Z value for ZnTTTD with the CDCA co-sensitizer dramatically increases up to 6.51%. This understanding of p-linker and co-sensitizer effects on the performance of porphyrins will serve as a guideline for the design of future dye sensitizers for DSSCs.

ทินกร แก้วอินทร์ Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2017-06-14
    ชื่อวารสาร
  • NEW JOURNAL OF CHEMISTRY
    DOI
11 A spectroscopic study of indigo dye in aqueous solution: A combined experimental and TD-DFT study

This study reports UV–Visible spectra and electronic structures of indigo (IG) in aqueous solution using a combination of experimental and theoretical methods. In the visible region, the experimental absorption spectrum of the solution showed a broad peak with the longest wavelength of maximal absorption (λmax) value at 708 nm. For the theoretical method, a trans-IG monomer and a trans-IG bound with two water molecules (IG.2W) were optimized in the ground state using the B3LYP and B3LYP-D3 calculations with the 6-31 + G(d,p) basis set and the SCRF-CPCM model for taking solvent effect into account was also applied. Sequentially, the UV–Visible spectra and λmax of the optimized trans-IG and IG.2W models in the implicit water were simulated by the time-dependent density functional theory (TD-DFT) calculations. The TD-DFT methods including BLYP, B3LYP, PBE0, CAM-B3LYP, M06-2X, ωB97XD, LC-BLYP, and LC-ωPBE functionals without and with the D3 correction and the 6-31 + G(d,p) basis set were selected. The results pointed out that BLYP and BLYP-D3 were the best methods because they could reproduce the experimental λmax value of IG in aqueous solution. The predicted λmax values of IG.2W were almost equal to 708 nm (the experimental data), indicating that IG.2W could be responsible for optical properties of IG.

ศิริพร จึงสุทธิวงษ์ Q2 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-12-01
    ชื่อวารสาร
  • JOURNAL OF LUMINESCENCE
12 Development of interactive particulate-level visualization in chemistry by using augmented reality technology: Collision theory and chemical reaction rate ศักดิ์ศรี สุภาษร Q2 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-11-18
    ชื่อวารสาร
  • Turkish Online Journal of Educational Technology
    DOI
13 Multi step energy transfer between three Si_LTL and SiGe_LTL zeoliteloaded dyes ศิริพร จึงสุทธิวงษ์ Q2 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-10-01
    ชื่อวารสาร
  • Journal of Porous Materials
    DOI
14 Fabrication of a three-dimensional electrochemical paper-based device (3D-ePAD) for individual and simultaneous detection of ascorbic acid, dopamine and uric acid Fabrication of a three-dimensional electrochemical paper-based device (3D-ePAD) for individual and simultaneous detection of ascorbic acid, dopamine and uric acid

We report the development of a three-dimensional electrochemical paper-based analytical device (3DePAD) for the individual and simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The device was fabricated by alkyl ketene dimer (AKD)-inkjet printing of a circularly hydrophobic zone on filter paper for application of aqueous samples coupled with screen-printing of the electrodes on the paper which was folded underneath hydrophobic zone. A self-assembled threeelectrode system, comprising a graphite paste modified with Fe3O4@Au-Cys/PANI was fabricated on the patterned paper by screen printed through the pre-designed transparent film slit. The three electrodes of Fe3O4@Au-Cys/PANI modified graphite electrodes (Fe3O4@Au-Cys/PANI/GFE) on the layout paper were served as the working electrode, the reference electrode, and the counter electrode, respectively. Cyclic voltammetry (CV) was used to study the electrochemical mechanism of AA, DA and UA. The results indicated that a high sensitivity towards AA, DA and UA was observed. Our results suggested that coating the working electrode with anionic surfactant, SDS (1 mM, pH 2), provides the distinguishable oxidation peak potential of AA and did not overlap with the oxidation peak of DA and UA. As a result, simultaneous determination of these three molecules in a mixture can be achieved. Examples of individual quantification of DA and UA in pharmaceutical and urine samples were demonstrated using differential pulse voltammetry (DPV). Under the optimum condition, the developed 3D-ePAD gave a linearity ranged from 20 to 1,000 µM for both DA and UA. The detection limits were 2.19 and 1.80 µM for DA and UA, respectively. There are no significant matrix interferences in the analyzed samples which can be concluded that the proposed method is suitable for the quantification of DA and UA with sufficient accuracy and precision.

มะลิวรรณ อมตธงไชย Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-07-01
    ชื่อวารสาร
  • International Journal of Electrochemical Science
15 การพัฒนาความเข้าใจมโนมติของนักเรียนระดับมัธยมศึกษาปีที่ 5 เรื่อง อัตราการเกิดปฏิกิริยาเคมี ด้วยการทดลองแบบสืบเสาะ สุภาพ ตาเมือง Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-07-01
    ชื่อวารสาร
  • วารสารศึกษาศาสตร์ มหาวิทยาลัยเชียงใหม่
    DOI
16 Carbon-doped boron nitride nanosheet as a promising metal-free catalyst for NO reduction: DFT mechanistic study ศิริพร จึงสุทธิวงษ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-05-05
    ชื่อวารสาร
  • Applied Catalysis A: General
    DOI
17 Monitoring of glucose and ethanol during winefermentation by bienzymatic biosensor อัญชลี สำเภา Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-05-01
    ชื่อวารสาร
  • Journal of Electroanalytical Chemistry
    DOI
18 Selective amperometric flow-injection analysis of carbonfuran using a molecularly-imprinted polymer and gold coated magnetite modified carbon nanotube-paste electrode มะลิวรรณ อมตธงไชย Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-03-01
    ชื่อวารสาร
  • Talanta
    DOI
19 Complexometric and argentometric titrations using thread-based analytical devices ปุริม จารุจำรัส Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-17
    ชื่อวารสาร
  • Talanta
    DOI
20 Molecular docking study of pyrrolyl benzohydrazide derivatives to explore the structure requirements of InhA inhibitors พรพรรณ พึ่งโพธิ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-07
    ชื่อวารสาร
  • Pure and Applied Chemistry International Conference 2018 (PACCON2018)
    DOI
21 Rational design of PknB inhibitors in class of 4-oxo-crotonic acid derivatives as highly potent anti-tuberculosis agents พรพรรณ พึ่งโพธิ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-07
    ชื่อวารสาร
  • Pure and Applied Chemistry International Conference 2018 (PACCON2018)
    DOI
22 Computer aided molecular design of ATPase inhibitors in a series of 7-chloro-4-piperazinoquinoline derivatives: Molecular docking and 3D-QSAR study พรพรรณ พึ่งโพธิ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-07
    ชื่อวารสาร
  • Pure and Applied Chemistry International Conference 2018 (PACCON2018)
    DOI
23 Elucidating structural basis of 4-aminoquinoline derivatives as novel M. tuberculosis DNA GyrB inhibiters: molecular docking study พรพรรณ พึ่งโพธิ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-07
    ชื่อวารสาร
  • Pure and Applied Chemistry International Conference 2018 (PACCON2018)
    DOI
24 Structure based drug design of 2-(1H-benzo[d]imidazol-2-yl)-2-cyanovinyl as DNA gyrase subunit B inhibitors for anti-tuberculosis agent พรพรรณ พึ่งโพธิ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-07
    ชื่อวารสาร
  • Pure and Applied Chemistry International Conference 2018 (PACCON2018)
    DOI
25 carboxamide analogues as DNA gyrase subunit B inhibitors for anti-tuberculosis agents: 3D-QSAR Molecular docking calculations พรพรรณ พึ่งโพธิ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-07
    ชื่อวารสาร
  • Pure and Applied Chemistry International Conference 2018 (PACCON2018)
    DOI
26 Molecular modeling of InhA inhibitors in the class of Benzimidazole derivatives as a novel Anti-tuberculosis agents พรพรรณ พึ่งโพธิ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-07
    ชื่อวารสาร
  • Pure and Applied Chemistry International Conference 2018 (PACCON 2018)
    DOI
27 The equilibrium study of methylene blue from aqueous solution using zeolite synthesized as highly potential adsorbent from water sludge พรพรรณ พึ่งโพธิ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-07
    ชื่อวารสาร
  • Pure and Applied Chemistry International Conference 2018 (PACCON2018)
    DOI
28 Utilization of zeolites synthesized from water sludge for heavy metal treatment in wastewater พรพรรณ พึ่งโพธิ์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-07
    ชื่อวารสาร
  • Pure and Applied Chemistry International Conference 2018 (PACCON2018)
    DOI
29 A Novel Benzo[d,e]Chromene for Organic Light Emitting Diodes (OLEDs) รักเกียรติ จิตคติ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-01
    ชื่อวารสาร
  • Applied Mechanics and Materials
    DOI
30 Poly(m-ferrocenylaniline) modified carbon nanotubes-paste electrode encapsulated in nafion film for selective and sensitive determination of dopamine and uric acid in the presence of ascorbic acid เสนอ ชัยรัมย์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-01
    ชื่อวารสาร
  • Journal of Saudi Chemical Society
    DOI
31 Fabricating Simple Wax Screen-Printing Paper-Based Analytical Devices To Demonstrate the Concept of Limiting Reagent in Acid−Base Reactions เสนอ ชัยรัมย์ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-02-01
    ชื่อวารสาร
  • Journal of Chemical Education
    DOI
32 Atomic force microscopy investigation of phase morphology correlated with adhesive properties for modified telechelic natural rubber based-pressure sensitive adhesive ศิริวัฒน์ ระดาบุตร Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-01-18
    ชื่อวารสาร
  • JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
    DOI
33 Use of a smartphone as a Colorimetric Analyzer in Paper-based Devices for Sensitive and Selective determination of Mercury in Water Samples ปุริม จารุจำรัส Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-01-10
    ชื่อวารสาร
  • Analytical Sciences
    DOI
34 Comparison of reinforcing efficiency between calcium carbonate/carbon black and calcium carbonate/silica hybrid filled natural rubber composites สราวุธ ประเสริฐศรี Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-01-01
    ชื่อวารสาร
  • Defect and Diffusion Forum
    DOI
35 Thiocyanate Free Ruthenium(II) Complexes for Dye Sensitized Solar Cells (DSSCs) รักเกียรติ จิตคติ Q3 นานาชาติ
    วันที่ตีพิมพ์
  • 2018-01-01
    ชื่อวารสาร
  • Defect & Diffusion Forum
    DOI
36 DFT Study of Catalytic CO2 Hydrogenation over Pt-Decorated Carbon Nanocones: H2 Dissociation Combined with the Spillover Mechanism DFT Study of Catalytic CO2 Hydrogenation over Pt-Decorated Carbon Nanocones: H2 Dissociation Combined with the Spillover Mechanism

In this work, we investigate the catalytic role of platinum-decorated defective CNC (Pt/dCNC) in CO2 hydrogenation to formic acid (FA) by a density functional theory (DFT) approach. The reaction follows the equation CO2(g) + H2(g) → HCOOH(g). Combining highly reactive Pt atoms with defective CNC provides Pt/dCNC, a reactive monodispersed atomic catalyst for CO2 hydrogenation. We propose our new mechanism of CO2 hydrogenation over the Pt/dCNC catalyst involving a H2 dissociation and H spillover sequence that is energetically favorable. The rate-determining step is formic acid desorption that requires an energy barrier of 1.11 eV. Furthermore, our findings show that the rate of FA production is dependent on H2 concentration. Altogether, the theoretical results support the concept of the spillover mechanism, playing a key role in promoting CO2 hydrogenation via a formate intermediate. These results improve our understanding of the mechanism involving H2 dissociation with the H spillover process and the catalytic reactions that are very important for the development of highly efficient catalysts for CO2 conversion into FA.

ศิริพร จึงสุทธิวงษ์ Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-12-26
    ชื่อวารสาร
  • The Journal of Physical Chemistry C
37 A highly sensitive fenobucarb electrochemical sensor based on graphene nanoribbons-ionic liquid-cobalt phthalocyanine composites modified on screen-printed carbon electrode coupled with a flow injection analysis A highly sensitive fenobucarb electrochemical sensor based on graphene nanoribbons-ionic liquid-cobalt phthalocyanine composites modified on screen-printed carbon electrode coupled with a flow injection analysis

A sensitive and rapid method for the determination of fenobucarb by using screen-printed carbon electrode modified with graphene nanoribbons - ionic liquid - cobalt phthalocyanine (GNRs-IL-CoPc/SPCE) composites based on flow injection analysis (FIA) was developed and applied to vegetable samples. The prepared GNRs-IL-CoPc composite was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Moreover, cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS) were used to characterize the electrochemical behavior of the modified SPCE. The amperometric current responses were obtained from the oxidation of 2-sec-butyl-phenol, which is the product of alkaline hydrolysis of fenobucarb. The optimization of chemical variables and instrumental analysis such as composite amounts, pH, applied potential, and flow rate were carried out to obtain the best measurement. Under the optimal conditions, the proposed sensor yielded sensitivity of 0.0884 M/A·cm2, a wide linear range for detection of fenobucarb from 0.025 to 110 μM with a low detection, and quantification limits of 0.0089 μM and 0.0252 μM, respectively. Additionally, the developed sensor showed good repeatability (RSD = 3.5%, n = 10 measurements) and good reproducibility (RSD = 3.9%, n = 5 sensors). The proposed method could be effectively applied for the determination of fenobucarb in vegetable samples.

อัญชลี สำเภา Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-12-15
    ชื่อวารสาร
  • Journal of Electroanalytical Chemistry
38 Screen-printed microfluidic paper-based analytical device (μPAD) as a barcode sensor for magnesium detection using rubber latex waste as a novel hydrophobic reagent Screen-printed microfluidic paper-based analytical device (μPAD) as a barcode sensor for magnesium detection using rubber latex waste as a novel hydrophobic reagent

This work reports the first use of cis-1,4-polyisoprene obtained from rubber latex (RL) waste as the hydrophobic reagent for the fabrication of a microfluidic paper-based analytical device (mPAD), providing a user-friendly means for magnesium detection. The mPAD was fabricated using a screen printing technique and the barcode-like paper sensor was then used for the detection of Mg(II) ions in RL and water samples. Using different types of paper media (paper towel, Whatman No.1 and Whatman No.4), the results indicate that the key factors in optimizing the quality of the fabricated mPAD include the viscosity of cis-1,4-polyisoprene solution which could be adjusted using different solvents and heating temperatures, the mesh screen size, the pore size of the paper substrates, and the dimension of the sample zone. The fabricated mPAD, which showed high chemical resistance, durability and design flexibility, was tested for the detection of Mg(II) ions using the reaction based on complexometric titration with EDTA where Eriochrome Black T was used as an indicator. An Android application “UBU OMg Sensor” was also developed to provide a simple, fast, and accurate means for end-users to interpret results generated by our developed mPAD .

ปุริม จารุจำรัส Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-11-15
    ชื่อวารสาร
  • Analytica Chimica Acta
39 Novel amperometric flow-injection analysis of creatinine using a molecularly-imprinted polymer coated copper oxide nanoparticle-modified carbon-paste-electrode Novel amperometric flow-injection analysis of creatinine using a molecularly-imprinted polymer coated copper oxide nanoparticle-modified carbon-paste-electrode

We report a novel amperometric flow-injection (FI) analysis of creatinine based on a sensor comprising copper oxide nanoparticles (CuO) coated with a molecularly-imprinted polymer (CuO@MIP) and decorating a carbon-paste electrode (CPE) to form the CuO@MIP/CPE electrode. The CuO@MIP was synthesized by using CuO as the supporting core, creatinine as the template, methacrylic acid (MAA) as monomer, N, N′-(1,2-dihydroxyethylene)bis(acrylamide) (DHEBA) as cross-linker, and 2,2′-azobis (2-methylpropionitrile) (AIBN) as initiator. Morphology and structural characterization reveal that CuO nanoparticle imprinted sites (CuO) synthesized using a precipitation method, exhibits features that are well suited to creatinine detection: high surface area, good analyte diffusion and adsorption characteristics that provide shorter response times, and large numbers of specific cavities for enhanced analyte capacity and sensitivity. Cyclic voltammetric measurements indicate that our sensor provides excellent performance toward electro-oxidation of creatinine. The amperometric FI system was used to quantitatively determine creatinine at the CuO@MIP/CPE sensor, in a phosphate buffer carrier. The imprinted sensor exhibits excellent performance for creatinine oxidation at an applied potential of +0.35 V and flow rate of 0.6 mL.min−1. The as-prepared sensor exhibits a linear dynamic range for creatinine detection from 0.5 to 200 μM (r2 = 0.995) with a limit of detection of 0.083 μM (S/N = 3). The system exhibits satisfactorily good precision (%RSD = 1.94%, n = 30) and selectivity toward creatinine. There is only approximately 20% loss from initial response after 2 weeks when stored at 4 oC. We successfully applied the FI detection system to detect creatinine in human urine samples.

มะลิวรรณ อมตธงไชย Q2 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-10-25
    ชื่อวารสาร
  • Journal of Pharmaceutical and Biomedical Analysis
    DOI
40 Highly sensitive and selective electrochemical paper-based device using a graphite screen-printed electrode modified with molecularly imprinted polymers coated Fe3O4@Au@SiO2 for serotonin determination Highly sensitive and selective electrochemical paper-based device using a graphite screen-printed electrode modified with molecularly imprinted polymers coated Fe3O4@Au@SiO2 for serotonin determination

Herein, we propose a highly sensitive and selective three-dimensional electrochemical paper-based analytical device (3D-ePAD) to determine serotonin (Ser). It uses a graphite-paste electrode modified with nanoparticles coated with molecularly imprinted polymer (MIP). Fe3O4@Au nanoparticles were encapsulated with silica to create novel nano-sized MIP. Morphology and structural characterization reveal that silica imprinted sites (Fe3O4@Au@SiO2) synthesized via sol-gel methods provide excellent features for Ser detection, including high porosity, and greatly improve analyte diffusion and adsorption to provide a faster response by the MIP sensor. The template molecule was effectively removed by solvent extraction to provide a greater number of specific cavities that enhance analyte capacity and sensitivity. The 3D-ePAD was fabricated by alkyl ketene dimer (AKD)-inkjet printing of a circular hydrophobic detection zone on filter paper for application of aqueous samples, coupled with screen-printed electrodes on the paper, which was folded underneath the hydrophobic zone. The sensor was constructed by drop coating of Fe3O4@Au@SiO2-MIP nanocomposites on the graphite electrode (GPE) surface. The MIP sensor (Fe3O4@Au@SiO2-MIP/GPE) was used in the detection of Ser by linear-sweep voltammetry (LSV) in 0.1 M phosphate buffer at pH 8.0. The device exhibits high sensitivity toward Ser, which we attribute to synergistic effects between catalytic properties, electrical conductivity of Fe3O4@Au@SiO2, and significantly increased numbers of imprinted sites. Ser oxidation was observed at +0.39 V. Anodic peak currents for Ser show linearity from 0.01 to 1000 μM (y = 0.0075 ± 0.0049 x + 0.4071 ± 0.0052, r2 = 0.993), with a detection limit of 0.002 μM (3S/N). The device provides good repeatability (%relative standard deviations; RSD) = 4.23%, calculated from the current responses of ten different MIP sensors). The device also exhibits high selectivity and reproducibility (%RSD = 8.35%, obtained from five calibration plots). The analytical performance of the device is suitable for the determination of Ser in pharmaceutical capsules and urine samples.

มะลิวรรณ อมตธงไชย Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-10-24
    ชื่อวารสาร
  • Analytica Chimica Acta
    DOI
41 Novel Three-Dimensional Molecularly Imprinted Polymer-Coated Carbon nanotubes (3D-CNTs@MIP) for Selective Detection of Profenofos in Food Novel three-Dimensional molecularly imprinted polymer-coated carbon nanotubes (3D-CNTs@MIP) for selective detection of profenofos in food

A new and facile method for selective measurement of profenofos (PFF) using a simple flow-injection system with a molecularly-imprinted-polymer-coated carbon nanotube (3D-CNTs@MIP) amperometric sensor is proposed. The 3D-CNTs@MIP was synthesized by successively coating the surface of carboxylated CNTs with SiO2 and vinyl end groups, then terminating with molecularly imprinted polymer (MIP) shells. MIP was grafted to the CNT cores using methacrylic acid (MAA) monomer, ethylene glycol dimethacrylate (EGDMA) as cross linker, and 2,20 -azobisisobutyronitrile (AIBN) as initiator. We constructed the PFF sensor by coating the surface of a glassy carbon electrode (GCE) with 3D-CNTs@MIP and removed the imprinting template by solvent extraction. Morphological and structural characterization reveal that blending of the MIP on the CNT surface significantly increases the selective surface area, leading to greater numbers of imprinting sites for improved sensitivity and electron transfer. The 3DCNTs@MIP sensor exhibits a fast response with good recognition when applied to PFF detection by cyclic voltammetry and amperometry. The PFF oxidation current signal appears at þ0.7 V vs Ag/AgCl using 0.1 M phosphate buffer (pH 7.0) as the carrier solution. The designed 3D-imprinted sensor provides a

มะลิวรรณ อมตธงไชย Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-10-17
    ชื่อวารสาร
  • Analytica Chimica Acta
    DOI
42 In silico study directed towards identification of the key structural features of GyrB inhibitors targeting MTB DNA gyrase: HQSAR, CoMSIA and molecular dynamics simulations In silico study directed towards identification of the key structural features of GyrB inhibitors targeting MTB DNA gyrase: HQSAR, CoMSIA and molecular dynamics simulations

Mycobacterium tuberculosis DNA gyrase subunit B (GyrB) has been identified as a promising target for rational drug design against fluoroquinolone drug-resistant tuberculosis. In this study, we attempted to identify the key structural feature for highly potent GyrB inhibitors through 2D-QSAR using HQSAR, 3D-QSAR using CoMSIA and molecular dynamics (MD) simulations approaches on a series of thiazole urea core derivatives. The best HQSAR and CoMSIA models based on IC50 and MIC displayed the structural basis required for good activity against both GyrB enzyme and mycobacterial cell. MD simulations and binding free energy analysis using MM-GBSA and waterswap calculations revealed that the urea core of inhibitors has the strongest interaction with Asp79 via hydrogen bond interactions. In addition, cation-pi interaction and hydrophobic interactions of the R2 substituent with Arg82 and Arg141 help to enhance the binding affinity in the GyrB ATPase binding site. Thus, the present study provides crucial structural features and a structural concept for rational design of novel DNA gyrase inhibitors with improved biological activities against both enzyme and mycobacterial cell, and with good pharmacokinetic properties and drug safety profiles.

พรพรรณ พึ่งโพธิ์ Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-10-14
    ชื่อวารสาร
  • SAR AND QSAR IN ENVIRONMENTAL RESEARCH
    DOI
43 FeIIFeIII layered double hydroxide nanosheets (FeIIFeIII LDHNS) as an enzyme mimic for colorimetric detection of H2O2 FeIIFeIII layered double hydroxide nanosheets (FeIIFeIII LDHNS) as an enzyme mimic for colorimetric detection of H2O2

In this study, a new, rapid, sensitive, and convenient approach for colorimetric detection of H2O2 using FeIIFeIII layered double hydroxide nanosheets (FeIIFeIII LDHNS) is reported. The FeIIFeIII LDHNS were constructed from a mixture of divalent and trivalent Fe ions by a co-precipitation method. FeIIFeIII LDHNS were found to possess superior intrinsic peroxidase-like activity. They were used to catalyze the oxidation of a peroxidase substrate 3,3′,5,5′-tetramethylbenzidine (TMB) and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) diammonium salt in the presence of H2O2 to produce a blue and green solution product, respectively, that provided colorimetric detection of H2O2. The colorimetric detection of H2O2 was conveniently carried out by incubating at room temperature. Moreover, for the ABTS substrate, the experiment was facilely and successfully carried out in deionized water at a pH of approximately 5.6. The colorimetric assays displayed linearity for H2O2 determination by using TMB and ABTS systems in the range of 0.1–50 μM and 0.5–20 μM, respectively, and the corresponding limits of detection were found to be 0.05 μM and 0.2 μM, respectively. The catalytic reaction follows Michaelis–Menten kinetics and exhibits strong affinity towards TMB, ABTS, and H2O2 substrates. This selective approach could be applied for H2O2 detection in real milk and disinfectant samples. It is expected that there is great potential for the proposed method for exact detection of H2O2 in biotechnology, clinical diagnoses, the food industry, and other industries

สุภาพ ตาเมือง Q2 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-10-07
    ชื่อวารสาร
  • Analytical Methods
    DOI
44 Photophysical Properties of Functionalized Double Decker Phenylsilsesquioxane Macromonomers: [PhSiO1.5]8[OSiMe2]2 and [PhSiO1.5]8[O0.5SiMe3]4. Cage-Centered Lowest Unoccupied Molecular Orbitals Form Even When Two Cage Edge Bridges Are Removed, Verified by Modeling and Ultrafast Magnetic Light Scattering Experiments hotophysical Properties of Functionalized Double Decker Phenylsilsesquioxane Macromonomers: [PhSiO1.5]8[OSiMe2]2 and [PhSiO1.5]8[O0.5SiMe3]4. Cage-Centered Lowest Unoccupied Molecular Orbitals Form Even When Two Cage Edge Bridges Are Removed, Verified by Modeling and Ultrafast Magnetic Light Scattering Experiments

Bromination and iodination of title double decker (DD) phenylsilsesquioxane macromonomers occurs at ortho and para positions, respectively, as in PhT8,10,12 cages. Heck cross-coupling with 4-Me/CNstyrene gives the corresponding 4-Me/CNstilbene-substituted cages. All compounds were characterized by FTIR, MALDI-TOF, TGA, NMR and GPC. These compounds show UV−vis absorptions very similar to individual stilbene analogues. However, emission for all macromonomers, except p-MeStil2Ph6DD(OTMS)4, is redshifted 50−70 nm as seen before in full and partial cages centered LUMOs conjugated to all the stilbene moieties suggesting semiconducting behavior. Cagecentered LUMO formation even occurs in a DD cage where two of four Si−O−Si bridges are broken suggesting that LUMO formation is an extremely common phenomenon. These results are supported by both modeling studies and nonlinear light scattering in which magnetic dipole moments form and scatter light in the cage centers. The exception behaves like p-methylstilbene in both absorption and emission indicating that the onset of semiconducting behavior requires a minimum number of substituents and points to the potential to tailor band gaps and therefore multiple photophysical properties.

ศิริพร จึงสุทธิวงษ์ Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-09-26
    ชื่อวารสาร
  • Macromolecules
45 Development of a novel three-dimensional microfluidic paper-based analytical device (3D-µPAD) for chlorpyrifos detection using graphene quantum-dot capped gold nanocomposite for colorimetric assay Development of a novel three-dimensional microfluidic paper-based analytical device (3D-µPAD) for chlorpyrifos detection using graphene quantum-dot capped gold nanocomposite for colorimetric assay

This report presents a three-dimensional microfluidic paper-based analytical device (3D-μPAD) with colorimetric assay, for chlorpyrifos organophosphate pesticide detection in vegetable samples. The 3DµPAD was fabricated by one-step polymer-screen-printing, using rubber latex (RL) waste as a hydrophobic reagent for low-cost and simple manufacture. The 3D-µPAD design comprises two sheets; a testing sheet containing two circular zones, and a sampling sheet in the shape of a dumbbell design. Assay involves the acetylcholinesterase (AChE)-catalysed hydrolysis of an acetylthiocholine (ATCh) substrate to produce thiocholine. Thiocholine causes the aggregation of graphenequantum-dot capped gold-nanocomposite particles (GQD-AuNPs) to give a purple–blue-coloured solution. Incubation with chlorpyrifos inhibits the hydrolysis reaction, resulting in anti-aggregation of redcoloured GQD-AuNPs. The assay can determine chlorpyrifos by ImageJ detection, over a linear range of 0.001 to 1.0 µg mL−1 , with a detection limit of 0.0007 µg mL−1 , without sophisticated instrumentation. The developed 3D-µPAD was applied to detect chlorpyrifos in spiked vegetable samples, with per cent recoveries ranging from 93.0% to 104.6%. Our developed device provides good precision (%RSD ranges from 0.3 to 1.6). The calculated relative error comparison with HPLC ranges from 1.0% to 5.2%, indicating a high degree of accuracy. The 3D-µPAD exhibits good sensitivity and selectivity for a low-cost and rapidscreening test for the presence of insecticides, and might be useful for on-site applications.

มะลิวรรณ อมตธงไชย Q4 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-08-07
    ชื่อวารสาร
  • International Journal of Environmental Analytical Chemistry
    DOI
46 A non-toxic approach to assess total antioxidant capacity (TAC) of exotic tropical fruits from Thailand A non-toxic approach to assess total antioxidant capacity (TAC) of exotic tropical fruits from Thailand

A simple flow injection analysis (FIA) integrating with a metal-free approach for total antioxidant capacity (TAC) was developed. The non-toxic reaction was based on generating a vibrant blue radical from imipramine to avoid the potential interferents arising from the colorful fruit extracts. The blue radical can be rapidly scavenged by antioxidant compounds present in the sample. TAC values of Thai tropical fruit extracts were assessed by monitoring the quenching in absorbance of the test mixture following the addition of the antioxidant compounds/fruit extracts. The FIA co-operated in order to increase the sample throughput. The results demonstrated that Antidesma thwaiteaianum Muell. Arg. has the highest capacity followed by Terminalia chebula Retz. and Phyllanthus Emblica Linn., respectively. An excellent correlation between the proposed method was found with the DPPH assay. The proposed method allowed the TAC determination of fruit extracts in a high-throughput and straightforward way in accordance with the principles of green analytical chemistry.

มะลิวรรณ อมตธงไชย Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-07-12
    ชื่อวารสาร
  • Journal of Food Science and Technology
    DOI
47 การศึกษาฤทธิ์ในการต้านอนุมูลอิสระและปริมาณฟีนอลิกรวมของสารสกัดข้าวกล้องงอก สมจินตนา ทวีพานิชย์ Q1 นานาชาติ
    วันที่ตีพิมพ์
  • 2019-07-11
    ชื่อวารสาร
  • เอกสารสืบเนื่องจากการประชุมวิชาการ มอบ.วิจัย ครั้งที่ 13
    DOI
48 Starch hydrogel-loaded cobalt nanoparticles for hydrogen production from hydrolysis of sodium borohydride Starch hydrogel-loaded cobalt nanoparticles for hydrogen production from hydrolysis of sodium borohydride

In this work, starch hydrogel was successfully prepared using a citric acid cross-linking method and then was utilized in the preparation of starch hydrogel-loaded cobalt nanoparticles (CoNPs) by the reduction of Co2+ ions loaded within the starch hydrogel network. The swelling behavior of starch hydrogel as a function of temperature and pH was also investigated. The resulting hydrogel-loaded CoNPs were confirmed using a number of techniques including powder x-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission